• Protection fuses for relay and electronics components;
• AUTO / OFF / MAN operating modality selector switch with key extractable at the position AUTO only;
• Alpha-numeric, high visibility illuminated blue LCD monitor;
• Automatic and manual LED test;
• Simplified navigation keyboard;
• 60 Alpha-numeric and graphics characters available;
• Messages at display in three languages (Italian, English, French);
• Programmable by keyboard internal clock and calendar with display of YEAR / MONTH / DAY of the WEEK / DAY of the MONTH / HOURS / MINUTS / SECONDS;
• Weekly test directly programmable by keyboard;
• Weekly test exclusion;
• Restoring of normal operating modality at the end of weekly test;
• Restoring of normal operating modality in case of fire during the weekly test;
• Storage settings on EEprom ram memory;
• Control of input signals with protection against electrics discharges and electrostatics;
• No-bouncing inputs controlled by software;
• Very low voltage (5 V) and very low current (< 0,5 mA) inputs;
• RS-485 serial port for alarms sending and resetting to up to 500 metres with dedicated control panel MC-PAR;
• I2Cbus internal serial port for communication with other electronic cards;
• In-Circuit software update;
• Possibility of stopping the pump at the restoring of pressure;
• Programmable number of start attempts;
• Programmable duration of start relay excitation;
• Programmable duration of pause among start attempts;
• State indication by means of high luminosity LED for:

• call from pressure switches (START BY CALL – PRESS. SWITCH);
• call from pressure transducer (START BY CALL – PRESS. TRANSD.), F.P.A. Norms only;
• Power in (POWER);
• General alarm (ALARM);
• MOTOR ON;
• STARTING FAILURE;
• SPRINKLER ALARM;
• TEST ENABLING;
• PRESSURE SYSTEM;
• UNLOADING VALVE;
• AUTOMATIC STOP (UNI EN 10779 Norms only);
• WEEKLY TEST;
• RUN;
• LOW LEVEL STORAGE TANK;
• LOW LEVEL FUEL TANK;
• LOW PRESSURE TOWN MAINS;
• MOTOR HIGH TEMPERATURE;
• LOW PRESSURE OIL;
• LOW TEMPERATURE ROOM;
• BATTERY 1 FAILURE;
• BATTERY 2 FAILURE;
• Main power failure (BATTERY 1 FAILURE and BATTERY 2 FAILURE);
• STOP;
  • Messages at display for:
• Date, time (hours, minutes and seconds), norms and key position;
• State of charge of both batteries;
• Key position;
• Motor stopped;
• Call from pressure switches;
• Call from pressure transducer;
• Call for priming;
• Start for priming;
• Number of starting attempts;
• Length of starting attempts;
• Pause between two starting attempts;
• Motor running;
• Starting failure;
• Start with battery 1;
• Start with battery 2;
• Start with batteries 1 and 2;
• Waiting for motor stop;
• Weekly test in progress;
• Fuel level (0 ÷ 100%);
• Low Level fuel;
• Oil pressure (1,0 ÷ 10,0 bar);
• Motor temperature (10°C ÷ 130°C);
• Running hours meter;
• Motor RpM.
  • Reset of alarm display;
  • Acknowledgement of acoustic alarms;
  • START/STOP by means remote control (not included);

Analogue Inputs:

• Fuel level (0 ÷ 100%);
• Motor oil pressure (1,0 ÷ 10,0 bar);
• Motor temperature (10°C ÷ 130°C);
• Battery 1 level;
• Battery 2 level.

Digital inputs:

• 2 NC (Normally Closed) pressure switches for fire detection;
• Float switch for priming tank of pump;
• Flow switch for sprinkler of pump room;
• Pump room temperature;
• Low level of storage tank (read low pressure town mains in case of supply by town mains);
• Storage tank empty;
• System in pressure;
• External start and stop buttons;
• Low pressure oil pump;
• High temperature water pump or oil pump;
• Low level fuel tank;
• Pick-up for round meter.

Outputs:

Free contacts for:

1. Type A Alarm;
2. Type B Alarm;